OPERATION

When the solenoid is not actuated, the valve reduces pressure applied at port ‘P’ and applies it to port ‘A’. Port ‘B’ is connected to port ‘T’. When the solenoid is actuated, reduced pressure is applied to port ‘B’, and port ‘A’ is connected to port ’T’. Reduced pressure is adjustable.

FEATURES

• Compact.
• Steel housing.350 bar (5000 p.s.I.) pressure rating.
• All cartridges 100% factory tested.
• Desired settings may be locked.
• Captive adjusters cannot be backed out of cartridges.
• Overpressure protected - springs cannot be wound solid.
• No dynamic seals.
• 12 or 24 volt operation (specify when ordering).

SPECIFICATIONS

• INLET PRESSURE: 350 bar (5000 p.s.I.) max.
• REDUCED PRESSURE: 7 - 100 bar (100 -1500 p.s.i.) adjustable.
• MEDIA: general purpose hydraulic fluids @ -40º c to +120º c.
• FLOW: To 25 l/min.
• WEIGHT: 2.9 Kg.
• COIL CURRENT DRAW: 3 amps(12 v.d.c.), 1.5 amps (24 v.d.c.).
  

IMPORTANT PRECAUTIONS

All ports are B.S.P. parallel, and appropriate fittings must be used. Tapered fittings are not acceptable. Failure to correctly install or set these valves may result in damage to property, personal injury or death.

NOTES

 VALVES ARE NOT PRESET, AND MUST BE ADJUSTED TO SUIT EACH APPLICATION PRIOR TO USE, USING APPROPRIATE TESTING EQUIPMENT.ALL DETAILS ARE APPROXIMATE, AND SUBJECT TO CHANGE WITHOUT NOTICE.

Download Full Catalogue