OPERATION

When the solenoid is not energised the valve directs oil from the ‘P’ port to the ‘B’ port. Port ‘A’ is connected to port ‘T’. When the solenoid is actuated, pressure is applied to port ‘A’, and port ‘B’ is connected to port ’T’.

FEATURES

• Compact.
• Steel housing.
• 350 bar (5000 p.s.I.) pressure rating.
• No dynamic seals.
• 12 or 24 volt operation (specify when ordering).
• All cartridges 100% factory tested.
  

SPECIFICATIONS

• OPERATING PRESSURE: 350 bar (5000 p.s.I.) max.MEDIA: general purpose hydraulic fluids @ -40º c to +120º c.FLOW: To 20 l/min.WEIGHT: 1.2 Kg.COIL CURRENT DRAW: 1.8 amps(12 v.d.c.), 0.9 amps (24 v.d.c.).
  

IMPORTANT PRECAUTIONS

All ports are B.S.P. parallel, and appropriate fittings must be used. Tapered fittings are not acceptable. Failure to correctly install or set these valves may result in damage to property, personal injury or death.

NOTES

 VALVES ARE NOT PRESET, AND MUST BE ADJUSTED TO SUIT EACH APPLICATION PRIOR TO USE, USING APPROPRIATE TESTING EQUIPMENT.ALL DETAILS ARE APPROXIMATE, AND SUBJECT TO CHANGE WITHOUT NOTICE.

Download Full Catalogue